DS90C032BTMX vs DS90C032TMX Comparison

Detailed side-by-side comparison of DS90C032BTMX by Texas Instruments and DS90C032TMX by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
DS90C032BTMX DS90C032BTMX - 155.5 Mbps LVDS Receiver | Texas Instruments

DS90C032BTMX - 155.5 Mbps LVDS Receiver | Texas Instruments

DS90C032BTMX ✓ Active
Texas Instruments
DS90C032TMX DS90C032TMX - Quad LVDS Receiver, 155.5 Mbps | Texas Instruments

DS90C032TMX - Quad LVDS Receiver, 155.5 Mbps | Texas Instruments

DS90C032TMX ✓ Active

Specification Comparison

Parameter DS90C032BTMX DS90C032TMX
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Receiver Type LVDS quad CMOS differential line receiver —
Number of Receiver Channels 4 channels —
Maximum Supported Data Rate >155.5 Mbps —
Maximum Signaling Frequency >77.7 MHz —
Input Signaling Standard LVDS —
Output Logic CMOS —
Power Dissipation Ultra-low power dissipation —
Package 16-pin SOIC 16-pin SOIC (D)
Package Width 0.154 in (3.90 mm) —
Terminal Count 16 terminals —
Lead Form Gull wing —
Mounting Type Surface mount Surface mount
Temperature Grade Industrial grade —
Receiver Enable [DATA_NEEDED: receiver enable function] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] 4.5 V to 5.5 V
Operating Temperature Range [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
Differential Input Voltage [DATA_NEEDED: differential input voltage range] —
Quiescent Current [DATA_NEEDED: quiescent current] —
Propagation Delay [DATA_NEEDED: propagation delay] —
RoHS Status [DATA_NEEDED: RoHS status] —
Product Type — LVDS quad CMOS differential line receiver
Number of Receivers — 4 receivers
Technology — CMOS
Minimum Detected Differential Signal — 100 mV
Input Common-Mode Range — ±1 V centered around +1.2 V
Nominal Signal Center — +1.2 V
Maximum Data Rate — In excess of 155.5 Mbps
Supply Voltage — 5 V
Device Type — Receiver
Interface Standard — LVDS
Output Interface — CMOS
Number of Pins — 16 pins
Lead-Free Status — [DATA_NEEDED: lead-free status]
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Termination Requirement — [DATA_NEEDED: input termination requirement]

Datasheets & Resources

Browse All Products Create BOM Request Quote