E180-Z6907A vs E180-ZG120B Comparison
Detailed side-by-side comparison of E180-Z6907A by EBYTE and E180-ZG120B by EBYTE. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | E180-Z6907A | E180-ZG120B |
|---|---|---|
| Brand | EBYTE | EBYTE |
| Category | RF Modules | RF Modules |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $2.30 | $4.10 |
| Module Type | ZigBee 3.0 SoC Module | ZigBee 3.0 SMD Module (Transceiver + SoC) |
| Chipset | Telink TLSR8269 | — |
| Operating Frequency | 2.4 GHz (2400-2483.5 MHz) | 2.4 GHz (2.4 to 2.4835 GHz ISM band) |
| Wireless Protocol | IEEE 802.15.4 / ZigBee 3.0 | ZigBee 3.0, IEEE 802.15.4 |
| Transmit Power | 7 dBm (typical) | 19 dBm typical (135 mA peak) |
| Supply Voltage | 3.3 V | 3.3 V DC |
| TX Current | 65 mA (typical peak at 7 dBm) | — |
| RX / Standby Current | 40 mA (typical) | — |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C |
| Range (line-of-sight) | 130 m (typical, low data rate) | 1.3 km with IPEX antenna |
| Package | SMD, 11.5 x 22 mm | — |
| Antenna | On-board PCB antenna | IPEX / U.FL connector (external) |
| Host Interface | GPIO (UART/SPI/I2C via GPIO mapping) | UART (AT command + transparent mode) |
| Mounting Type | Surface Mount (reflow) | Surface Mount (castellated pads) |
| Special Features | RF diagnostic function, built-in battery voltage monitoring | — |
| Compliance | RoHS | — |
| RF Chipset | — | Silicon Labs EFR32MG1B |
| Core Architecture | — | 32-bit ARM Cortex-M4 |
| Receive Current | — | 10 mA typical |
| Package / Dimensions | — | SMD, 18 x 11.5 mm |
| GPIO | — | Multi-GPIO accessible via UART/AT |
| Modulation | — | O-QPSK (IEEE 802.15.4 DSSS) |
| RoHS Status | — | Compliant |