E180-ZG120B vs E180-Z6907A Comparison
Detailed side-by-side comparison of E180-ZG120B by EBYTE and E180-Z6907A by EBYTE. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | E180-ZG120B | E180-Z6907A |
|---|---|---|
| Brand | EBYTE | EBYTE |
| Category | RF Modules | RF Modules |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $4.10 | $2.30 |
| Module Type | ZigBee 3.0 SMD Module (Transceiver + SoC) | ZigBee 3.0 SoC Module |
| RF Chipset | Silicon Labs EFR32MG1B | — |
| Core Architecture | 32-bit ARM Cortex-M4 | — |
| Operating Frequency | 2.4 GHz (2.4 to 2.4835 GHz ISM band) | 2.4 GHz (2400-2483.5 MHz) |
| Wireless Protocol | ZigBee 3.0, IEEE 802.15.4 | IEEE 802.15.4 / ZigBee 3.0 |
| Transmit Power | 19 dBm typical (135 mA peak) | 7 dBm (typical) |
| Receive Current | 10 mA typical | — |
| Supply Voltage | 3.3 V DC | 3.3 V |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C |
| Range (line-of-sight) | 1.3 km with IPEX antenna | 130 m (typical, low data rate) |
| Host Interface | UART (AT command + transparent mode) | GPIO (UART/SPI/I2C via GPIO mapping) |
| Package / Dimensions | SMD, 18 x 11.5 mm | — |
| Antenna | IPEX / U.FL connector (external) | On-board PCB antenna |
| GPIO | Multi-GPIO accessible via UART/AT | — |
| Modulation | O-QPSK (IEEE 802.15.4 DSSS) | — |
| Mounting Type | Surface Mount (castellated pads) | Surface Mount (reflow) |
| RoHS Status | Compliant | — |
| Chipset | — | Telink TLSR8269 |
| TX Current | — | 65 mA (typical peak at 7 dBm) |
| RX / Standby Current | — | 40 mA (typical) |
| Package | — | SMD, 11.5 x 22 mm |
| Special Features | — | RF diagnostic function, built-in battery voltage monitoring |
| Compliance | — | RoHS |