INA103KU vs INA101KU Comparison
Detailed side-by-side comparison of INA103KU by Texas Instruments and INA101KU by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA103KU - Low-Noise Instrumentation Amplifier | Texas Instruments
INA103KU ✓ ActiveTexas Instruments
INA101KU - High Accuracy Instrumentation Amp | Texas Instruments
INA101KU ✓ ActiveSpecification Comparison
| Parameter | INA103KU | INA101KU |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Monolithic instrumentation amplifier | — |
| Amplifier Circuit Count | 1 circuit | — |
| Package | 16-SOIC | 16-SOIC (DW / SOL-16) |
| Mounting Type | Surface mount | Surface Mount |
| Supply Voltage Range | 9 V to 25 V | +/-5 V to +/-20 V |
| Gain-Bandwidth Product | 6 MHz | — |
| Slew Rate | 15 V/s | 0.4 V/uS |
| Input Offset Voltage | 250 µV maximum | 25 uV max |
| Architecture | Current-feedback circuitry | — |
| Differential Input Support | Yes | — |
| Single-Ended Input Support | Yes | — |
| Recommended Source Impedance | 200 ohm | — |
| Noise Performance | Near-theoretical limit at a 200 ohm source impedance | — |
| Signal Type | Low-level differential audio and sensor signals | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Amplifier Type | — | Instrumentation Amplifier |
| Number of Circuits | — | 1 |
| Internal Topology | — | 3-amplifier (three op amp) architecture |
| Offset Voltage Drift | — | 0.25 uV/C max |
| Nonlinearity | — | 0.002% max |
| Input Voltage Noise | — | 13 nV/Hz |
| Common-Mode Rejection | — | High CMR at 60 Hz |
| Input Impedance | — | 10^10 ohm |
| Bandwidth | — | 25 kHz |
| Gain Setting | — | Single external resistor RG |
| Operating Temperature | — | [DATA_NEEDED: operating temperature range] |
| Quiescent Current | — | [DATA_NEEDED: quiescent current] |