INA118UB vs INA118U Comparison
Detailed side-by-side comparison of INA118UB by Texas Instruments and INA118U by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA118U - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA118U ✓ ActiveSpecification Comparison
| Parameter | INA118UB | INA118U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 | 1 circuit |
| Gain Bandwidth | 800 kHz (G = 1) | — |
| Slew Rate | 0.09 V/us | [DATA_NEEDED: slew rate] |
| Input Offset Voltage (Max) | 50 uV | — |
| Supply Voltage Range | 1.35 V to 18 V (per rail) | — |
| Gain Range | 1 V/V to 10000 V/V, set by single external resistor | — |
| Operating Temperature Range | -40C to +85C | -40 °C to +85 °C |
| Package | 8-SOIC (0.154 in, 3.90 mm Width) | 8-pin SOIC (0.154 inch, 3.90 mm width) |
| Mounting Type | Surface Mount | Surface mount |
| Architecture | 3-op-amp instrumentation amplifier | — |
| CMRR | [DATA_NEEDED: CMRR] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Quiescent Current | [DATA_NEEDED: quiescent current] | 350 μA |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Grade | B (enhanced offset accuracy) | — |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Nominal Gain | — | 100 |
| Bandwidth | — | 800 kHz |
| Minimum Supply Voltage | — | ±2.25 V |
| Input Offset Voltage | — | 50 μV |
| Input Offset Voltage Drift | — | 0.5 μV/°C |
| Common-Mode Rejection | — | 110 dB at G = 1000 |
| Package Options in INA118 Family | — | 8-pin plastic DIP and SO-8 surface-mount packages |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |