INA122PA vs AD621ANZ Comparison
Detailed side-by-side comparison of INA122PA by Texas Instruments and AD621ANZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ ActiveSpecification Comparison
| Parameter | INA122PA | AD621ANZ |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Instrumentation amplifier, two-op-amp design | — |
| Number of Channels | 1 | — |
| Supply Voltage Range (Single Supply) | 2.2 V to 36 V | — |
| Supply Voltage Range (Dual Supply) | +/-18 V | — |
| Quiescent Current | 60 uA | — |
| Input Offset Voltage (max) | 250 uV | — |
| Input Offset Drift (max) | 3 uV/degC | — |
| Common-Mode Rejection Ratio | 90 dB | — |
| Gain Range | 5 V/V to 10,000 V/V | [DATA_NEEDED: gain range] |
| Gain Bandwidth Product | 120 kHz | — |
| Input Common-Mode Range | (V-) - 0.1 V | — |
| Output Swing | Rail-to-rail | — |
| Package | 8-pin PDIP (P) | 8-pin PDIP (0.300 inch, 7.62 mm pitch) |
| Mounting Type | Through-hole | Through-hole |
| Supply Type | Single or dual supply operation | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Slew Rate | [DATA_NEEDED: slew rate specification] | 1.2 V/µs |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | Instrumentation Amplifier |
| Number of Circuits | — | 1 circuit |
| Packaging Type | — | Tube |
| Small-Signal Bandwidth | — | 800 kHz at -3 dB |
| Maximum Supply Current | — | 1.3 mA |
| Input Bias Current | — | 500 pA |
| Input Offset Voltage | — | 75 µV |
| Output Type | — | [DATA_NEEDED: output type] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Common-Mode Rejection | — | [DATA_NEEDED: input common-mode rejection] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Halogen-Free Status | — | Compliant |