INA122PA vs INA125PA Comparison
Detailed side-by-side comparison of INA122PA by Texas Instruments and INA125PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ ActiveSpecification Comparison
| Parameter | INA122PA | INA125PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Instrumentation amplifier, two-op-amp design | — |
| Number of Channels | 1 | — |
| Supply Voltage Range (Single Supply) | 2.2 V to 36 V | — |
| Supply Voltage Range (Dual Supply) | +/-18 V | — |
| Quiescent Current | 60 uA | 460 µA |
| Input Offset Voltage (max) | 250 uV | — |
| Input Offset Drift (max) | 3 uV/degC | — |
| Common-Mode Rejection Ratio | 90 dB | [DATA_NEEDED: common-mode rejection ratio] |
| Gain Range | 5 V/V to 10,000 V/V | 4 to 10,000 |
| Gain Bandwidth Product | 120 kHz | — |
| Input Common-Mode Range | (V-) - 0.1 V | — |
| Output Swing | Rail-to-rail | — |
| Package | 8-pin PDIP (P) | 16-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Supply Type | Single or dual supply operation | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Slew Rate | [DATA_NEEDED: slew rate specification] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | Single-channel instrumentation amplifier with precision voltage reference |
| Amplifier Count | — | 1 circuit |
| Gain Configuration | — | Single external resistor |
| Internal Reference Voltage | — | 10 V |
| Supply Voltage Range | — | 1.35 V to 18 V |
| Offset Voltage | — | 250 µV maximum |
| Offset Voltage Drift | — | 2 µV/°C maximum |
| Bandwidth | — | 150 kHz |
| Gain Error | — | 0.02% |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Range | — | [DATA_NEEDED: output voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |