INA125P vs INA125PA Comparison
Detailed side-by-side comparison of INA125P by Texas Instruments and INA125PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA125P - Precision Bridge Amplifier with 10V Reference | Texas Instruments
INA125P ✓ ActiveSpecification Comparison
| Parameter | INA125P | INA125PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Instrumentation amplifier with precision voltage reference | Single-channel instrumentation amplifier with precision voltage reference |
| Number of Circuits | 1 circuit | — |
| Maximum Input Offset Voltage | 250 µV | — |
| Maximum Input Offset Drift | 2 µV/°C | — |
| Slew Rate | 0.02 V/µs | — |
| Bandwidth | 150 kHz | 150 kHz |
| Supply Voltage | 2.7 V to 36 V | — |
| Quiescent Current | 460 µA typical | 460 µA |
| Precision Voltage Reference | 10 V | — |
| Operating Temperature | -40°C to +85°C | — |
| Package | 16-pin plastic DIP, through-hole | 16-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Temperature Grade | Industrial | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Gain | [DATA_NEEDED: gain configuration and range] | — |
| Sleep Mode | Supported | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Count | — | 1 circuit |
| Gain Range | — | 4 to 10,000 |
| Gain Configuration | — | Single external resistor |
| Internal Reference Voltage | — | 10 V |
| Supply Voltage Range | — | 1.35 V to 18 V |
| Offset Voltage | — | 250 µV maximum |
| Offset Voltage Drift | — | 2 µV/°C maximum |
| Gain Error | — | 0.02% |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Range | — | [DATA_NEEDED: output voltage range] |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |