INA128P vs INA129PG4 Comparison
Detailed side-by-side comparison of INA128P by Texas Instruments and INA129PG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA129PG4 Precision Instrumentation Amplifier | Texas Instruments
INA129PG4 ✓ ActiveSpecification Comparison
| Parameter | INA128P | INA129PG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier with current-feedback input circuitry |
| Common-Mode Rejection Ratio | 130 dB minimum | — |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Input Protection | ±40 V | Protected to +40 V |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Quiescent Current | 700 µA | — |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | 4 V/µs |
| Package | 8-pin plastic DIP (PDIP) | 8-PDIP (0.300 inch, 7.62 mm pitch) |
| Operating Temperature | -40 °C to +85 °C | — |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Packaging | — | Tube |
| Gain-Bandwidth Product | — | 1.3 MHz |
| Supply Current | — | 700 µA |
| Maximum Supply Voltage | — | +18 V |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Drift | — | 0.5 µV/5°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 120 dB |
| Maximum Protected Input Voltage | — | +40 V |
| Gain Range | — | 1 to [DATA_NEEDED: gain-range upper limit] |
| Mounting Type | — | Through-hole DIP |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |