INA128PA vs AD621ANZ Comparison
Detailed side-by-side comparison of INA128PA by Texas Instruments and AD621ANZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | INA128PA | AD621ANZ |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision instrumentation amplifier | Instrumentation Amplifier |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Package | 8-pin PDIP | 8-pin PDIP (0.300 inch, 7.62 mm pitch) |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Quiescent Current | 700 µA | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection | ±40 V | — |
| Supply Range | Up to ±18 V | — |
| Gain Range | 1 to 10,000 | [DATA_NEEDED: gain range] |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| Operating Temperature | -40°C to +85°C | — |
| Mounting Type | Through-hole | Through-hole |
| Packaging Type | — | Tube |
| Small-Signal Bandwidth | — | 800 kHz at -3 dB |
| Slew Rate | — | 1.2 V/µs |
| Maximum Supply Current | — | 1.3 mA |
| Input Bias Current | — | 500 pA |
| Input Offset Voltage | — | 75 µV |
| Operating Temperature Range | — | -40°C to +85°C |
| Output Type | — | [DATA_NEEDED: output type] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Common-Mode Rejection | — | [DATA_NEEDED: input common-mode rejection] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Halogen-Free Status | — | Compliant |
| RoHS Status | — | [DATA_NEEDED: RoHS status] |