INA129UA vs INA126UA Comparison
Detailed side-by-side comparison of INA129UA by Texas Instruments and INA126UA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA ✓ ActiveTexas Instruments
INA126UA - 36V Precision MicroPower Instrumentation Amplifier | TI
INA126UA ✓ ActiveSpecification Comparison
| Parameter | INA129UA | INA126UA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Precision instrumentation amplifier | Single-channel precision instrumentation amplifier |
| Number of Amplifier Circuits | 1 circuit | — |
| Input Offset Voltage | 50 µV maximum | 250 µV maximum |
| Input Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Common-Mode Rejection Ratio | 120 dB minimum | 74 dB minimum |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±18 V maximum | — |
| Minimum Total Supply Voltage | 4.5 V | 2.7 V |
| Maximum Gain | 10,000 V/V | — |
| Minimum Gain | 1 V/V | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Noise at 1 kHz | 8 nV/√Hz typical | — |
| Operating Temperature Range | -40 °C to +125 °C | — |
| Package | 8-pin SOIC (D) | 8-pin SOIC |
| Mounting Type | Surface mount | Surface mount |
| RoHS Status | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | unknown |
| Number of Channels | — | 1 channel |
| Maximum Supply Voltage | — | 36 V |
| Dual-Supply Operating Range | — | ±1.35 V to ±18 V |
| Quiescent Current | — | 175 µA per channel |
| Gain Bandwidth | — | 200 kHz |
| Architecture | — | Two-op-amp instrumentation amplifier |
| Gain Configuration | — | External resistor configuration |
| Signal Type | — | Differential input, single-ended output |
| Application Category | — | Low-noise differential signal acquisition |