INA129UA vs INA128UA Comparison
Detailed side-by-side comparison of INA129UA by Texas Instruments and INA128UA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA ✓ ActiveSpecification Comparison
| Parameter | INA129UA | INA128UA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Precision instrumentation amplifier | — |
| Number of Amplifier Circuits | 1 circuit | — |
| Input Offset Voltage | 50 µV maximum | — |
| Input Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Common-Mode Rejection Ratio | 120 dB minimum | 130 dB |
| Input Protection Range | ±40 V | -40 V to +40 V |
| Supply Voltage Range | ±18 V maximum | -18 V to +18 V |
| Minimum Total Supply Voltage | 4.5 V | — |
| Maximum Gain | 10,000 V/V | — |
| Minimum Gain | 1 V/V | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Input Noise at 1 kHz | 8 nV/√Hz typical | — |
| Operating Temperature Range | -40 °C to +125 °C | -40 degC to +85 degC |
| Package | 8-pin SOIC (D) | 8-pin SOIC, 3.90 mm width |
| Mounting Type | Surface mount | Surface mount |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Product Type | — | Precision low-power instrumentation amplifier |
| Number of Channels | — | 1 channel |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Voltage Drift | — | 0.5 uV/degC |
| Maximum Input Bias Current | — | 5 nA |
| Quiescent Current | — | 700 uA |
| Gain Range | — | 1 to 10,000 V/V |
| Gain-Bandwidth Product | — | 1.3 MHz |
| Minimum Dual Supply Voltage | — | -2.25 V to +2.25 V |
| Architecture | — | Three-op-amp instrumentation amplifier with current-feedback input circuitry |