INA131BPG4 vs INA131AP Comparison
Detailed side-by-side comparison of INA131BPG4 by Texas Instruments and INA131AP by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA131BPG4 - G=100 Instrumentation Amplifier | Texas Instruments
INA131BPG4 ✓ ActiveTexas Instruments
INA131AP - Precision G=100 Instrumentation Amp | Texas Instruments
INA131AP ✓ ActiveSpecification Comparison
| Parameter | INA131BPG4 | INA131AP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision instrumentation amplifier | — |
| Fixed Gain | 100 V/V | — |
| Internal Amplifier Count | 3 amplifiers | — |
| Circuit Count | 1 circuit | — |
| Output Type | Single-ended | — |
| Input Offset Voltage | 50 µV | 125 µV maximum |
| Bandwidth | 70 kHz | 70 kHz |
| Supply Voltage Range | 2.25 V to 18 V | ±2.25 V to ±18 V |
| Maximum Supply Voltage | ±18 V or 36 V total | — |
| Package | 8-pin PDIP | 8-pin PDIP |
| Package Width | 0.300 in (7.62 mm) | — |
| Mounting Type | Through-hole | Through-hole |
| Delivery Package | Tube | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 2 nA maximum |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Supply Current | [DATA_NEEDED: supply current] | — |
| Amplifier Type | — | Precision fixed-gain instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Gain | — | 100 V/V |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Slew Rate | — | 0.7 V/µs |
| Input Offset Voltage Drift | — | 0.25 µV/°C maximum |
| Common-Mode Rejection Ratio | — | 106 dB |
| Input Overvoltage Protection | — | ±40 V |
| Internal Architecture | — | 3-op-amp instrumentation amplifier |
| Quiescent Current | — | [DATA_NEEDED: quiescent current] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |