INA132UA vs INA137UA Comparison
Detailed side-by-side comparison of INA132UA by Texas Instruments and INA137UA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA137UA - +/-6dB Audio Differential Line Receiver SOIC-8 | Texas Instruments
INA137UA ✓ ActiveSpecification Comparison
| Parameter | INA132UA | INA137UA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Low-power, unity-gain difference amplifier | — |
| Number of Channels | 1 channel | 1 |
| Gain | 1 V/V (unity gain) | -6 dB (G = 1/2) or +6 dB (G = 2), selected by resistor configuration |
| Single-Supply Voltage Range | Up to 36 V | — |
| Dual-Supply Voltage Range | ±18 V | — |
| Quiescent Current | 160 uA | — |
| Gain-Bandwidth Product | 300 kHz | — |
| Input Offset Voltage | 500 uV maximum | [DATA_NEEDED: input offset voltage typical and maximum] |
| Gain Error | ±0.075% maximum | — |
| Nonlinearity | 0.001% maximum | — |
| Common-Mode Rejection | 90 dB minimum | — |
| Slew Rate | 100 mV/us minimum | [DATA_NEEDED: slew rate] |
| Operating Temperature Range | -55°C to +125°C | [DATA_NEEDED: operating junction/ambient temperature range] |
| Package | 8-pin SOIC | 8-pin SOIC (DBV) |
| Mounting Type | Surface mount | Surface mount |
| Internal Gain Resistors | Laser trimmed | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance statement] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Device Type | — | Audio differential line receiver IC (single channel) |
| Supply Voltage | — | +/-18 V maximum (36 V total) |
| Output Type | — | Differential |
| Manufacturer | — | Texas Instruments (Burr-Brown heritage) |
| Delivery Format | — | Tube (UA suffix) |
| Differential Input | — | Yes, balanced input pair (IN+ / IN-) |
| Common-Mode Rejection Ratio (CMRR) | — | [DATA_NEEDED: CMRR minimum/typical at DC and at frequency] |
| Supply Current | — | [DATA_NEEDED: quiescent supply current per amplifier] |
| Small-Signal Bandwidth | — | [DATA_NEEDED: bandwidth at G = 1/2 and G = 2] |
| Input Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Lead-Free | — | [DATA_NEEDED: lead-free / halogen-free statement] |