INA141U vs INA128HD Comparison
Detailed side-by-side comparison of INA141U by Texas Instruments and INA128HD by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA141U - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA141U UnknownSpecification Comparison
| Parameter | INA141U | INA128HD |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Unknown | Active |
| Product Type | Precision, low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Gain | 10 V/V or 100 V/V | — |
| Gain Accuracy | ±0.05% at G = 10 | — |
| Offset Voltage | 50 µV maximum | — |
| Offset Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Common-Mode Rejection | 117 dB minimum | — |
| Input Protection | ±40 V | — |
| Supply Range | ±18 V | — |
| Bandwidth | 200 kHz at G = 100 V/V | — |
| Quiescent Current | 750 µA maximum | — |
| Package | 8-pin SOIC | 8-pin SOIC, 0.154 inch body width, 3.90 mm |
| Operating Temperature | −40°C to +85°C | — |
| RoHS Status | Green product; no Sb/Br | — |
| Input Protection Class | Differential and common-mode inputs protected to ±40 V | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Channels | — | 1 channel |
| Common-Mode Rejection Ratio | — | 130 dB |
| Common-Mode Rejection Ratio at Gain 100 or Higher | — | 93 dB minimum |
| Typical Offset Voltage | — | 25 µV |
| Typical Input Bias Current | — | 50 nA |
| Gain Range | — | 1 to 10,000 V/V |
| Gain-Bandwidth Product | — | 1.3 MHz |
| Slew Rate | — | 4 V/µs |
| Typical Quiescent Current | — | 700 µA |
| Supply Voltage Range | — | 4.5 V to 36 V total, equivalent to ±18 V |
| Maximum Input Protection Range | — | ±40 V |
| Gain-Setting Resistor | — | 49.4 kΩ |
| Mounting Type | — | Surface mount |
| Packaging | — | Bulk |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |