INA141UA vs INA141UAG4 Comparison
Detailed side-by-side comparison of INA141UA by Texas Instruments and INA141UAG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA141UAG4 - 1 MHz Instrumentation Amplifier | Texas Instruments
INA141UAG4 ObsoleteSpecification Comparison
| Parameter | INA141UA | INA141UAG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Obsolete |
| Amplifier Type | Instrumentation amplifier | — |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | — |
| Selectable Gain | 10 V/V or 100 V/V | — |
| Bandwidth at G=100 | 200 kHz | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 117 dB | — |
| Maximum Protected Input Voltage | ±40 V | — |
| Supply Voltage Range | ±18 V | [DATA_NEEDED: supply voltage range] |
| Quiescent Current | [DATA_NEEDED: numeric quiescent current] | [DATA_NEEDED: quiescent current] |
| Gain Accuracy | [DATA_NEEDED: numeric gain error and tolerance] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | [DATA_NEEDED: input common-mode range] |
| Output Voltage Range | [DATA_NEEDED: output voltage swing range] | [DATA_NEEDED: output voltage range] |
| Operating Temperature Range | [DATA_NEEDED: numeric operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Temperature Grade | Industrial | — |
| Package | 8-pin SOIC | 8-SOIC, 0.154 inch body width, 3.90 mm width |
| Mounting Type | Surface mount | Surface mount |
| Terminal Count | 8 terminals | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Product Type | — | Precision low-power instrumentation amplifier |
| Amplifier Count | — | 3 amplifiers |
| Gain | — | 10 or 100 |
| Bandwidth | — | 1 MHz |
| Common-Mode Rejection Ratio | — | 110 dB |
| Input Offset Voltage | — | 20 µV |
| Input Offset Voltage, Datasheet Listing | — | 250 µV |
| Input Noise Density | — | 8 nV/√Hz |
| Output Type | — | Single-ended |
| Supply Current | — | [DATA_NEEDED: typical supply current] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |