INA148UA vs INA149AIDR Comparison
Detailed side-by-side comparison of INA148UA by Texas Instruments and INA149AIDR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA149AIDR - ±275V Difference Amplifier | Texas Instruments (Tape & Reel)
INA149AIDR ✓ ActiveSpecification Comparison
| Parameter | INA148UA | INA149AIDR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision unity-gain difference amplifier | High common-mode voltage difference amplifier |
| Common-Mode Voltage Range | ±200 V | — |
| Differential Gain | 1 | 1 V/V (unity gain) |
| Bandwidth | 100 kHz | — |
| Slew Rate | 1 V/µs | — |
| Input Offset Voltage | 5 mV | [DATA_NEEDED: input offset voltage] |
| Minimum Common-Mode Rejection Ratio | 70 dB | — |
| Minimum Supply Voltage | 2.7 V | — |
| Maximum Supply Voltage | 36 V | — |
| Minimum Operating Temperature | −55 °C | — |
| Maximum Operating Temperature | +125 °C | — |
| Amplifier Count | 1 | — |
| Internal Amplifier Implementation | Monolithic precision bipolar operational amplifier | — |
| Resistor Network | Thin-film resistor network | — |
| Package | 8-pin SOIC | 8-pin SOIC |
| Mounting Type | Surface mount | Surface mount |
| Moisture Sensitivity Level | MSL 3, 168 hours | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | RoHS compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Amplifier Circuit Count | — | 1 circuit |
| Architecture | — | Monolithic precision op amp with integrated thin-film resistor network |
| Input Common-Mode Voltage Range | — | -275 V to +275 V |
| Supply Voltage Range | — | Up to 36 V total, including ±18 V dual supply operation |
| Common-Mode Rejection Ratio | — | 90 dB minimum at +125°C DC |
| Operating Temperature Range | — | -40°C to +125°C |
| Pin Count | — | 8 pins |
| Lead-Free Status | — | Lead free |
| Gain Error | — | [DATA_NEEDED: gain error] |
| -3 dB Bandwidth | — | [DATA_NEEDED: -3 dB bandwidth] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Quiescent Current | — | [DATA_NEEDED: quiescent current] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Noise Performance | — | [DATA_NEEDED: noise performance] |