INA163UA vs INA129UA Comparison
Detailed side-by-side comparison of INA163UA by Texas Instruments and INA129UA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA163UA - Low-Noise Instrumentation Amplifier | Texas Instruments
INA163UA ✓ ActiveTexas Instruments
INA129UA - Precision Instrumentation Amplifier | Texas Instruments
INA129UA ✓ ActiveSpecification Comparison
| Parameter | INA163UA | INA129UA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Low-noise, low-distortion instrumentation amplifier | — |
| Architecture | Monolithic current-feedback instrumentation amplifier | — |
| Number of Circuits | 1 circuit | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | ±18 V maximum |
| Output Current | [DATA_NEEDED: output current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 50 µV maximum |
| Gain | [DATA_NEEDED: gain configuration] | — |
| Bandwidth | [DATA_NEEDED: bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Input Noise | [DATA_NEEDED: input noise] | — |
| Distortion | [DATA_NEEDED: distortion] | — |
| Maximum Gain | [DATA_NEEDED: maximum gain] | 10,000 V/V |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Package | 14-pin SOIC | 8-pin SOIC (D) |
| Mounting Type | Surface mount | Surface mount |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Termination/Packing Code | UA package code | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Amplifier Circuits | — | 1 circuit |
| Input Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Common-Mode Rejection Ratio | — | 120 dB minimum |
| Input Protection Range | — | ±40 V |
| Minimum Total Supply Voltage | — | 4.5 V |
| Minimum Gain | — | 1 V/V |
| Gain Setting | — | Single external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Input Noise at 1 kHz | — | 8 nV/√Hz typical |