INA2137PA vs INA137PA Comparison
Detailed side-by-side comparison of INA2137PA by Texas Instruments and INA137PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | INA2137PA | INA137PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual audio differential line receiver | Single audio differential line receiver |
| Channel Count | 2 channels | — |
| Nominal Gain Option 1 | 0.5 (-6 dB) | — |
| Nominal Gain Option 2 | 2 (+6 dB) | — |
| Package | 14-pin PDIP (N) | 8-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Supply Voltage Options | 9 V, 12 V, 15 V, 18 V, 24 V, or 28 V | — |
| Input Configuration | Differential | — |
| Signal Category | Audio | — |
| Manufacturer | Texas Instruments | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Current | [DATA_NEEDED: supply current] | — |
| Input Voltage Range | [DATA_NEEDED: input voltage range] | — |
| Output Voltage Range | [DATA_NEEDED: output voltage range] | — |
| Frequency Response | [DATA_NEEDED: frequency response] | — |
| Noise Performance | [DATA_NEEDED: input noise voltage or noise density] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 90 dB |
| Bandwidth | [DATA_NEEDED: bandwidth] | [DATA_NEEDED: bandwidth] |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Number of Channels | — | 1 channel |
| Fixed Gain | — | 1/2 (-6 dB) or 2 (+6 dB) |
| Supply Voltage Range | — | ±18 V |
| Total Supply Voltage | — | 36 V |
| Distortion | — | 0.0005% at 1 kHz |
| Slew Rate | — | 14 V/µs |
| Quiescent Current | — | 2.9 mA maximum |
| Settling Accuracy | — | 0.01% |
| Internal Resistors | — | On-chip precision resistors |
| Input Signal Type | — | Differential audio signal |
| Output Configuration | — | Single-ended |
| Gain Configurations | — | Resistor reversal selects -6 dB or +6 dB |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |