IR2130SPBF vs IR2130STRPBF Comparison
Detailed side-by-side comparison of IR2130SPBF by Infineon and IR2130STRPBF by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | IR2130SPBF | IR2130STRPBF |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Motor Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Driver Type | Half-Bridge / 3-Phase Bridge | — |
| Number of Channels | 3 high-side + 3 low-side | — |
| Configuration | Inverting | 3-Phase Bridge (6 channel: 3 high-side + 3 low-side) |
| Maximum Offset Voltage (High Side) | 600 V | — |
| Supply Voltage (VCC) | 10 V to 20 V | — |
| Output Source/Sink Current | 200 mA / 420 mA typical; 500 mA peak | — |
| Logic Input Compatibility | CMOS/LSTTL down to 2.5 V | — |
| Propagation Delay (Typ.) | 425 ns | — |
| Integrated Op-Amp | Yes (ground-referenced current sense) | — |
| Fault Output | Yes (active-low FAULT pin) | — |
| Under-Voltage Lockout | Yes (VCC and VBS) | — |
| Operating Temperature | -40 C to +125 C | — |
| Package | 28-SOIC (300 mil) | 28-SOIC Wide-Body (SOIC-28WB, 0.295" / 7.50 mm width) |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant (PbF suffix) | — |
| Lead-Free | Yes | — |
| MSL Level | 3 (168 hours) | — |
| Input Logic Type | — | Inverting |
| Number of Outputs | — | 6 (3 high-side referenced, 3 low-side referenced) |
| High-Side Offset Voltage (V_B) | — | Up to +600 V |
| Gate Drive Supply Voltage (VCC) | — | 10 V to 20 V |
| Logic Supply Voltage (VDD) | — | 2.5 V logic compatible (CMOS/LSTTL) |
| Source Current (typ.) | — | 0.25 A |
| Sink Current (typ.) | — | 0.5 A |
| Peak Output Current | — | 200 mA (datasheet 3-phase driver figure) |
| Propagation Delay (typ.) | — | 675 ns |
| Dead-Time (typ.) | — | 2.5 us (IR2130) |
| Undervoltage Lockout | — | Yes (all 6 channels) |
| Over-Current Shutdown | — | Yes (turns off all 6 drivers, FAULT output) |
| Integrated Current-Sense Op-Amp | — | Yes (ground-referenced) |
| dV/dt Immunity | — | Yes (tolerant to negative transient voltage on phase node) |
| Operating Temperature Range | — | -40C to +125C |
| Packaging | — | Tape & Reel (TR) |
| Lead-Free / RoHS | — | Yes (PbF suffix indicates lead-free) |