ISO1042DW vs TJA1052IT Comparison
Detailed side-by-side comparison of ISO1042DW by Texas Instruments and TJA1052IT by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | ISO1042DW | TJA1052IT |
|---|---|---|
| Brand | Texas Instruments | NXP Semiconductors |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Galvanically isolated CAN FD transceiver | — |
| Maximum CAN FD Data Rate | 5 Mbps | — |
| Classic CAN Data Rate | 1 Mbps | — |
| CAN Physical-Layer Standard | ISO 11898-2:2016 | — |
| DC Bus Fault Protection | ±70 V DC | — |
| Common-Mode Voltage Range | ±30 V | — |
| Loop Delay | 152 ns | — |
| Supply Voltage Range | 1.8 V to 5.5 V | — |
| Isolation Type | Reinforced galvanic isolation | Galvanic (integrated, reinforced) |
| Package | 16-pin wide-body SOIC (DW) | — |
| Mounting Type | Surface mount | Surface Mount |
| Operating Temperature Range | -40 °C to +125 °C | — |
| Bus-Side ESD Tolerance | HBM ESD protection; rating [DATA_NEEDED: HBM ESD voltage] | — |
| Transceiver Count | 1 transceiver | — |
| Logic-Side Supply | 1.8 V to 5.5 V | — |
| RoHS Compliance | [DATA_NEEDED: RoHS status] | — |
| REACH Compliance | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Function | — | Galvanically Isolated High-Speed CAN Transceiver |
| Data Rate | — | Up to 1 Mbit/s |
| Protocol | — | ISO 11898-2 (High-Speed CAN) |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage - VCC (logic side) | — | 3 V to 5.25 V |
| Supply Voltage - VBUS (bus side) | — | 4.75 V to 7 V [DATA_NEEDED: exact VBUS range from datasheet] |
| Operating Temperature | — | -40 C to +125 C |
| Package / Case | — | 16-SOIC (SO-16, narrow body) |
| Common-Mode Transient Immunity | — | [DATA_NEEDED: CMTI value from datasheet] |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM ESD rating] |
| Loop Delay (typical) | — | [DATA_NEEDED: typical TX-to-RX loop delay] |
| Target Application | — | EV / HEV automotive high-voltage CAN |
| RoHS Status | — | Compliant |
| AEC-Q100 | — | Qualified (automotive grade) |
| MSL Level | — | [DATA_NEEDED: MSL rating] |