ISO1042QDWVRQ1 vs ISO1042BQDWVQ1 Comparison
Detailed side-by-side comparison of ISO1042QDWVRQ1 by Texas Instruments and ISO1042BQDWVQ1 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
ISO1042QDWVRQ1 - Isolated CAN Transceiver 5Mbps 8-SOIC | TI
ISO1042QDWVRQ1 ✓ ActiveSpecification Comparison
| Parameter | ISO1042QDWVRQ1 | ISO1042BQDWVQ1 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Isolated CAN Transceiver | Galvanically isolated CAN transceiver |
| Protocol | CAN, CAN FD per ISO 11898-2 (2016) | — |
| Number of Channels | 1/1 (half duplex) | — |
| Data Rate (max) | 5 Mbps (CAN FD flexible data rate) | — |
| Isolation Voltage | 2.5 kV RMS (per VDE 0884-11) | — |
| Bus Fault Protection (DC) | ±70 V | — |
| Common-Mode Voltage Range | ±30 V | ±30 V |
| Common-Mode Transient Immunity (CMTI) | 250 kV/us typical | — |
| Logic-Side Supply (VCC1) | 1.7 V to 5.5 V | — |
| Bus-Side Supply (VCC2) | 4.5 V to 5.5 V | — |
| Operating Temperature Range | -40 C to +125 C | — |
| Package | SOIC-8 (DWV) 5.85 x 6.5 mm wide-body, 8 pins | 8-pin SOIC (DWV) |
| Mounting Type | Surface Mount | Surface mount |
| MSL Level | [DATA_NEEDED: MSL level] | — |
| Automotive Qualification | AEC-Q100 Grade 1 | AEC-Q100 automotive grade |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free / Halogen-Free | Yes / Yes | — |
| CAN Standard | — | ISO11898-2:2016 |
| Maximum Data Rate | — | 5 Mbps |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Half-duplex |
| Receiver Hysteresis | — | 120 mV |
| Logic-Side Supply Voltage | — | 1.71 V to 5.5 V |
| CAN-Side Supply Voltage | — | 4.5 V to 5.5 V |
| DC Bus-Fault Protection | — | ±70 V |
| Operating Temperature | — | -40 °C to 125 °C |
| Shipping Package | — | Tube |
| Isolation Type | — | Galvanic isolation |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Isolation withstand Voltage | — | [DATA_NEEDED: isolation withstand voltage] |