ISO122P vs ISO122JPE4 Comparison
Detailed side-by-side comparison of ISO122P by Texas Instruments and ISO122JPE4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
ISO122P - Precision 50kHz Isolation Amplifier | Texas Instruments
ISO122P ✓ ActiveTexas Instruments
ISO122JPE4 - Precision Isolation Amplifier | Texas Instruments
ISO122JPE4 ✓ ActiveSpecification Comparison
| Parameter | ISO122P | ISO122JPE4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision isolation amplifier | Precision isolation amplifier |
| Number of Circuits | 1 circuit | — |
| Maximum Nonlinearity | 0.020% | — |
| Signal Bandwidth | 50 kHz | — |
| Input Offset-Voltage Drift | 200 V/°C maximum | — |
| Power Supply Range | 4.5 V to 18 V | — |
| VS1 Quiescent Current | 5 mA | — |
| VS2 Quiescent Current | ±5.5 mA | — |
| Bipolar Supply Operation | ±10 V | — |
| High-Voltage Breakdown Rating | 1500 Vrms | — |
| Isolation Method | Duty-cycle modulation and demodulation | — |
| Differential Capacitive Barrier | 2 pF | — |
| Gain Configuration | Fixed unity gain | — |
| ISO122P Package | 8-pin plastic DIP | — |
| Mounting Type | Through-hole | Through-hole |
| Single-Supply Operation | Supported on the high-voltage side with a 5.1 V Zener-generated negative supply | — |
| High-Voltage Testing | 100% tested for rated high-voltage breakdown | — |
| Number of Amplifier Channels | — | 1 circuit |
| Input Signal Range | — | 50 mV |
| Bandwidth | — | 50 kHz |
| Isolation Voltage | — | 1.5 kV |
| Supply Voltage Range | — | 4.5 V to 18 V |
| Package | — | 8-PDIP (16-DIP mechanical outline, 8 leads) |
| Isolation Technology | — | Duty-cycle modulation-demodulation |
| Isolation Barrier | — | 2 pF differential capacitive barrier |
| Signal Transmission Across Barrier | — | Digital |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Isolation Mode | — | [DATA_NEEDED: isolation mode] |
| RoHS Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | not_applicable |