ITS4130QEPDXUMA1 vs ITS4040DEPDXUMA1 Comparison
Detailed side-by-side comparison of ITS4130QEPDXUMA1 by Infineon and ITS4040DEPDXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | ITS4130QEPDXUMA1 | ITS4040DEPDXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Topology | High-Side Power Switch (1:1) | 1:1 High-Side (N-Channel MOSFET, two channels) |
| Number of Channels | 4 (Quad) | 2 (independent) |
| On-State Resistance RDS(ON) | 130 mΩ (typ at Tj=25°C), 205 mΩ (typ at Tj=125°C) | — |
| Per-Channel Current | 650 mA (DC, per channel) | — |
| Load-Dump Tolerance | 45 V | — |
| Switch Type | N-Channel MOSFET | — |
| Package | PG-TSDSO-14 (14-pin, exposed pad) | PG-TSDSO-14 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40C to +125C (Tj) | — |
| Fault Protection | Over-current, Over-temperature, Over-voltage, Open-load detection | — |
| Diagnostic Output | Yes (status/feedback pin) | Current-sense (IS) pin, proportional to load current |
| Reverse Polarity Protection | Achievable with external 150Ω GND resistor or GND diode+27Ω series resistor | — |
| Family | PROFET Industrial (ITS41xxQ-EP-D series) | — |
| Product Status | Active / Production | — |
| RoHS Status | Compliant | Compliant |
| MSL Level | MSL3 (per Infineon package handling guidelines) | — |
| Product Type | — | Dual-Channel Smart High-Side Power Switch (PROFET) |
| Operating Voltage Range | — | -0.3 V to 45 V (load-dump tolerant) |
| Typical On-State Resistance per Channel (RDS(ON)) | — | 60 mΩ at TJ = 125 °C |
| Continuous Load Current per Channel | — | >2 A |
| Combined Peak Capability | — | 4.1 A (per datasheet summary) |
| Per-Channel Current Limit (typ.) | — | 2.6 A |
| On/Off Input Interface | — | Logic-level GPIO compatible (3.3 V / 5 V) |
| Integrated Protection | — | Over-current, over-voltage, over-temperature, short-to-ground, short-to-battery, reverse battery |
| Operating Temperature (TJ) | — | -40 °C to +150 °C (typical automotive PROFET range) |