ITS4200SSJDXUMA1 vs ITS4090QEPDXUMA1 Comparison
Detailed side-by-side comparison of ITS4200SSJDXUMA1 by Infineon and ITS4090QEPDXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | ITS4200SSJDXUMA1 | ITS4090QEPDXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power Distribution Switches |
| Lifecycle Status | Active | Active |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET (MINI-PROFET) | — |
| Switch Type | High-Side N-Channel, 1:1 | — |
| On-State Resistance (R_DS(on)) | 200 mOhm (typical) | — |
| Continuous Load Current | 1.2 A | — |
| Supply Voltage (Vbb) | 6 V to 52 V | — |
| Quiescent Current | 0.8 mA | — |
| Maximum Power Dissipation | 1400 mW | — |
| Operating Temperature | -40 C to +150 C | — |
| Package | PG-DSO-8 (DSO-8) | PG-TSDSO-14 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Output Configuration | Single high-side switch | — |
| Protection Features | Overload, current limit, short circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) |
| Diagnostic Output | Status pin for fault feedback | — |
| Load Type | Resistive and inductive loads | — |
| RoHS Status | Compliant | Compliant |
| Product Type | — | Quad-Channel Smart High-Side Power Switch |
| Family | — | PROFET (PROtected FET) 24V/48V |
| Number of Channels | — | 4 |
| Topology | — | High-Side Switch (N-Channel DMOS) |
| Typical RDS(ON) per Channel | — | 90 mΩ |
| RDS(ON) at Tj = 125 °C | — | 140 mΩ (typical) |
| Nominal Continuous Output Current per Channel | — | 750 mA |
| Minimum Current per Channel | — | 500 mA |
| Supply Voltage Range (Operating) | — | 4.5 V to 45 V |
| Supply Voltage Range (Absolute Maximum) | — | -0.3 V to 45 V |
| On-State Input Voltage (Logic High) | — | [DATA_NEEDED: VIH threshold] |
| Operating Temperature Range | — | -40 °C to +150 °C (Tj) |
| Diagnostic Feedback | — | Current-sense IS pin (analog proportional to load) |
| PWM Capability | — | Up to 1 kHz (typical) |
| MSL Level | — | [DATA_NEEDED: MSL rating] |