LBAD0XX1WG-EVK-TEMP vs LBAD0XX1SC-DM-EVK-B Comparison
Detailed side-by-side comparison of LBAD0XX1WG-EVK-TEMP by Murata Manufacturing and LBAD0XX1SC-DM-EVK-B by Murata Manufacturing. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Murata Manufacturing
LBAD0XX1WG-EVK-TEMP - LTE Cat M1 Evaluation Kit | Murata
LBAD0XX1WG-EVK-TEMP ✓ ActiveMurata Manufacturing
LBAD0XX1SC-DM-EVK-B - LTE Cat M1/NB-IoT Eval Kit | Murata
LBAD0XX1SC-DM-EVK-B ✓ ActiveSpecification Comparison
| Parameter | LBAD0XX1WG-EVK-TEMP | LBAD0XX1SC-DM-EVK-B |
|---|---|---|
| Brand | Murata Manufacturing | Murata Manufacturing |
| Category | RF Modules | Development Boards |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.00 | $0.00 |
| Product Type | LTE Cat M1 Evaluation Kit (EVK) | LTE Cat M1/NB-IoT Module Evaluation Board |
| Target Module | Type 1WG (LBAD0XX1WG) | — |
| Cellular Protocol | LTE Cat M1 (LTE-M) | — |
| Supply Voltage Range | 2.85 V to 4.35 V | — |
| Receive Sensitivity | -23 dBm (per Murata Type 1WG listing) | — |
| Hibernation Power | 3 uA | — |
| eDRX Power | <45 uA at 8 hyperframes | — |
| PSM Dormant Window | Configurable | — |
| Power Saving Modes | 3GPP eDRX and PSM | — |
| Battery Life | Up to 10+ years (low power modes) | — |
| Antenna Configuration | External antenna | — |
| Module Package | LGA | — |
| Firmware Update | OTA firmware update supported | — |
| Frequency Support | Low and mid bands (family-level: 699 MHz to 960 MHz, 1.71 GHz to 2.17 GHz) | — |
| Operating Temperature Qualification | Temperature-qualified variant (TEMP) | — |
| RoHS Status | unknown | — |
| Evaluation Board Interface | [DATA_NEEDED: evaluation board interface] | — |
| Evaluated Module | — | LBAD0XX1SC (Type 1SC) |
| Transceiver IC | — | Altair ALT1250 |
| Cellular Technology | — | LTE Cat M1, LTE NB1 (NB-IoT) |
| Frequency Range | — | 699 MHz to 960 MHz, 1.71 GHz to 2.17 GHz |
| GNSS Support | — | GPS, GLONASS |
| 3GPP Compliance | — | Release 14 |
| Output Power | — | 23 dBm (Cat M1 and NB1, nominal) |
| Module Flash Memory | — | 16 MByte |
| Module Dimensions | — | 11.1 x 11.4 x 1.4 mm (typical) |
| Low Power Modes | — | LTE-M PSM and eDRX |
| Board Interfaces | — | Arduino shield interface, micro SIM slot, 3 LEDs, SMA RF connector |
| Antenna | — | LTE/GNSS antenna included |
| Supply Input | — | USB or external 5 V |
| Onboard Rails | — | 3.3 V and 1.8 V via LDOs |
| Kit Contents | — | Evaluation board, 2 mini USB cables, quick start guide |
| Operating Temperature | — | [DATA_NEEDED: operating temperature range] |
| MSL Level | — | [DATA_NEEDED: MSL level] |