LM239N vs LM239NG Comparison
Detailed side-by-side comparison of LM239N by Texas Instruments and LM239NG by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM239N - Quad Open-Collector Comparator, 14-DIP | Texas Instruments
LM239N ✓ ActiveSpecification Comparison
| Parameter | LM239N | LM239NG |
|---|---|---|
| Brand | Texas Instruments | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Quad differential voltage comparator | Quad general-purpose comparator |
| Number of Channels | 4 independent channels | 4 channels |
| Output Type | Open-collector | Open collector |
| Maximum Offset Voltage | 2 mV maximum | — |
| Input Bias Current | 25 nA typical | — |
| Input Offset Current | [DATA_NEEDED: LM239N input offset current] | — |
| Supply Voltage Range | Wide range; related LM139/139A family specifies 2 V to 36 V DC | 3 V to 36 V |
| Single-Supply Operation | Supported | — |
| Split-Supply Operation | Supported | — |
| Low-Level Sensing | Designed for sensing near ground | — |
| Logic Compatibility | TTL, DTL, ECL, MOS, and CMOS | TTL, CMOS, and MOS |
| Typical Application | Level detection, low-level sensing, and memory applications | — |
| Power Drain | Suitable for battery operation | — |
| Operating Temperature | [DATA_NEEDED: LM239N operating temperature range] | — |
| Package | 14-pin PDIP | 14-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| RoHS Status | [DATA_NEEDED: LM239N RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: LM239N REACH status] | unknown |
| Automotive Qualification | [DATA_NEEDED: LM239N AEC-Q100 qualification] | — |
| Typical Low Output Saturation Voltage | — | 130 mV at 4 mA |
| Typical Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | ±5 nA |
| Input Offset Voltage | — | 1.3 mV typical |
| Operating Temperature Range | — | -25°C to +85°C |
| Supply Configuration | — | Single supply or split supply |
| Primary Application | — | Level detection, low-level sensing, and memory applications |
| AEC-Q100 Qualification | — | unknown |