LM2901N vs LM339NE3 Comparison
Detailed side-by-side comparison of LM2901N by Texas Instruments and LM339NE3 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM339NE3 - 36V Quad Open-Collector Comparator | Texas Instruments
LM339NE3 ✓ ActiveSpecification Comparison
| Parameter | LM2901N | LM339NE3 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Quad differential comparator | Differential, general-purpose |
| Number of Channels | 4 channels | — |
| Supply Configuration | Single or split supply | — |
| Maximum Supply Voltage | 36 V | — |
| Input Bias Current | 25 nA typical | — |
| Input Offset Current | ±5.0 nA typical | — |
| Supply Current Drain | 800 µA typical | — |
| Output Type | Open collector | Open-collector |
| Logic Compatibility | TTL, DTL, MOS, ECL, and CMOS output compatibility | TTL, MOS, and CMOS |
| Package | 14-pin DIP | 14-PDIP, 0.300 inch pitch, 7.62 mm |
| Mounting Type | Through hole | Through-hole |
| Operating Temperature | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Response Time | [DATA_NEEDED: comparator response time] | 1 µs |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| RoHS Status | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Number of Elements | — | 4 comparators |
| Single-Supply Voltage Range | — | 2 V to 36 V |
| Dual-Supply Voltage Range | — | ±1 V to ±18 V |
| Low Input Offset Voltage | — | 0.37 mV |
| Low Input Bias Current | — | 3.5 nA |
| Supply Current | — | 200 µA per comparator |
| ESD Rating | — | 2 kV HBM |
| Maximum Rated Supply Voltage | — | 38 V |
| Common-Mode Input Range | — | Includes ground |
| Differential Input Voltage Range | — | ±38 V |
| Packaging | — | Tube |