LM2901PWR vs LM339PWR Comparison
Detailed side-by-side comparison of LM2901PWR by Texas Instruments and LM339PWR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2901PWR - Quad 30V Open-Collector Comparator | Texas Instruments
LM2901PWR ✓ ActiveTexas Instruments
LM339PWR - 4-Channel 36V Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM339PWR ✓ ActiveSpecification Comparison
| Parameter | LM2901PWR | LM339PWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | General-purpose differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage | 2 V to 36 V | — |
| Dual Supply Voltage | ±1 V to ±18 V | — |
| Maximum Rated Supply | 38 V | — |
| Output Type | Open-collector | Open-collector |
| Logic Compatibility | TTL, MOS, and CMOS | — |
| Low Input Offset Voltage | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | 3.5 nA |
| Supply Current | 200 µA per comparator | — |
| Response Time | 1 µs | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Differential Input Voltage Range | ±38 V | — |
| ESD Rating | 2 kV HBM | — |
| Package | 14-pin TSSOP | 14-pin TSSOP |
| Mounting Type | Surface mount | Surface mount |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Supply Voltage Range | — | 2 V to 36 V |
| Maximum Family Rating | — | Up to 38 V |
| Propagation Delay | — | 300 ns |
| Family Response Time | — | 1 µs |
| Low Input Offset | — | 0.37 mV |
| Supply Current per Comparator | — | 200 µA typical |
| Differential Input Voltage | — | Equal to maximum-rated supply voltage, up to ±38 V |
| ESD Rating HBM | — | 2 kV |
| Output Compatibility | — | Compatible with TTL, MOS, and CMOS |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |