LM2902KD vs LM2902KDBRE4 Comparison

Detailed side-by-side comparison of LM2902KD by Texas Instruments and LM2902KDBRE4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
LM2902KD LM2902KD - Quad 26V 1.2MHz Op Amp | Texas Instruments

LM2902KD - Quad 26V 1.2MHz Op Amp | Texas Instruments

LM2902KD ✓ Active
Texas Instruments
LM2902KDBRE4 LM2902KDBRE4 - Quad 26V 1.2MHz Op Amp | Texas Instruments

LM2902KDBRE4 - Quad 26V 1.2MHz Op Amp | Texas Instruments

LM2902KDBRE4 ✓ Active

Specification Comparison

Parameter LM2902KD LM2902KDBRE4
Brand Texas Instruments Texas Instruments
Category Amplifier ICs Amplifier ICs
Lifecycle Status Active Active
Number of Amplifier Channels 4 circuits 4 circuits
Amplifier Type General-purpose operational amplifier Quad general-purpose operational amplifier
Maximum Supply Voltage 26 V —
Typical Gain-Bandwidth Product 1.2 MHz —
Improved ESD Protection 2 kV —
Typical Input Offset Voltage 3 mV 3 mV
Typical Input Offset Current 2 nA 2 nA
Typical Supply-Current Drain 0.8 mA —
Typical Input Bias Current 20 nA —
Operating Temperature Range -40 °C to +125 °C [DATA_NEEDED: operating temperature range]
Compensation Internal frequency compensation —
Common-Mode Input Range Includes ground —
Package 14-pin SOIC (D), 3.90 mm width 14-pin SSOP
Mounting Type Surface mount —
Product Family LM2902K —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] [DATA_NEEDED: lead-free status]
Maximum Total Supply Voltage — 26 V
Maximum Dual Supply Voltage — ±13 V
Gain-Bandwidth Product — 1.2 MHz
Maximum Input Offset Voltage — 2 mV
Typical Supply Current — 0.8 mA
Common-Mode Input Voltage — Includes ground
Frequency Compensation — Internal
Packaging — Tape and reel
ESD Protection, MIL-STD-883 Method 3015 — <500 V
Machine-Model ESD Protection — >200 V at 200 pF
Automotive Qualification — AEC-Q100 qualified
Configuration Control — Customer-specific support with major-change approval
RoHS Status — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

Datasheets & Resources

Browse All Products Create BOM Request Quote