LM2902KD vs LM2902KVQDRG4Q1 Comparison
Detailed side-by-side comparison of LM2902KD by Texas Instruments and LM2902KVQDRG4Q1 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2902KVQDRG4Q1 - Quad 30V 1.2MHz Op Amp, AEC-Q100 | Texas Instruments
LM2902KVQDRG4Q1 ✓ ActiveSpecification Comparison
| Parameter | LM2902KD | LM2902KVQDRG4Q1 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Number of Amplifier Channels | 4 circuits | — |
| Amplifier Type | General-purpose operational amplifier | Quad, general-purpose, voltage-feedback operational amplifier |
| Maximum Supply Voltage | 26 V | — |
| Typical Gain-Bandwidth Product | 1.2 MHz | — |
| Improved ESD Protection | 2 kV | — |
| Typical Input Offset Voltage | 3 mV | — |
| Typical Input Offset Current | 2 nA | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Typical Input Bias Current | 20 nA | — |
| Operating Temperature Range | -40 °C to +125 °C | -55 C to +125 C (-67 F to +257 F) |
| Compensation | Internal frequency compensation | — |
| Common-Mode Input Range | Includes ground | — |
| Package | 14-pin SOIC (D), 3.90 mm width | — |
| Mounting Type | Surface mount | Surface mount |
| Product Family | LM2902K | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Number of Amplifiers | — | 4 channels |
| Supply Voltage Range | — | 5 V to 30 V |
| Unity Gain Bandwidth | — | 1.2 MHz |
| Slew Rate | — | 0.5 V/us |
| Input Offset Voltage (max) | — | 10,000 uV (10 mV) |
| Common-Mode Rejection Ratio (CMRR) | — | 80 dB |
| Input Bias Current (IBIAS) | — | 0.5 uA class |
| Package Type | — | SOIC-14 (PDSO14), MS-012AB |
| Number of Pins | — | 14 |
| ESD - HBM | — | Less than 500 V per MIL-STD-883, Method 3015 |
| ESD - Machine Model | — | Exceeds 200 V (200 pF, 1500 ohm) |
| Automotive Qualification | — | AEC-Q100 qualified |
| Body Material / Finish | — | Green (lead-free) plastic |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Quiescent Current (per channel) | — | [DATA_NEEDED: supply current per amplifier] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain A_OL] |