LM2902KNSR vs LM2902KNSRG4 Comparison
Detailed side-by-side comparison of LM2902KNSR by Texas Instruments and LM2902KNSRG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2902KNSR - 26V Quad 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902KNSR ✓ ActiveSpecification Comparison
| Parameter | LM2902KNSR | LM2902KNSRG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Quad general-purpose operational amplifier | — |
| Number of Channels | 4 circuits | — |
| Maximum Supply Voltage | 26 V | 26 V |
| Supply Voltage Range | 3 V to 26 V | — |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Input Bias Current | 20 nA | [DATA_NEEDED: input bias current] |
| Quiescent Current | 0.5 uA | — |
| Open-Loop Gain | 80 dB | [DATA_NEEDED: open-loop gain] |
| ESD Protection | 2 kV improved ESD | — |
| Package | 14-SOIC, 0.209 inch, 5.30 mm width | 14-SO |
| Mounting Type | Surface mount | Surface mount |
| Operating Voltage, Positive | 3 V to 26 V | — |
| Operating Voltage, Negative | -26 V to -3 V | — |
| Output Voltage Range | Approximately -13 V to +13 V | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Number of Amplifiers | — | 4 circuits |
| Improved ESD Rating | — | 2 kV |
| Maximum Operating Temperature | — | 125 C |
| Automotive Qualification | — | AEC-Q100 qualified |
| Human Body Model ESD | — | <500 V per MIL-STD-883, Method 3015 |
| Machine Model ESD | — | 200 V at 200 pF |
| Channel Configuration | — | 4 independent operational amplifiers |
| Compensation | — | Internally frequency compensated |
| Supply Configuration | — | Single or split supply |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Supply Current | — | [DATA_NEEDED: supply current per amplifier] |