LM2902KNSR vs LM2902KVQDR Comparison
Detailed side-by-side comparison of LM2902KNSR by Texas Instruments and LM2902KVQDR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2902KNSR - 26V Quad 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902KNSR ✓ ActiveSpecification Comparison
| Parameter | LM2902KNSR | LM2902KVQDR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Quad general-purpose operational amplifier | Quad general-purpose operational amplifier |
| Number of Channels | 4 circuits | — |
| Maximum Supply Voltage | 26 V | 30 V |
| Supply Voltage Range | 3 V to 26 V | — |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Input Bias Current | 20 nA | — |
| Quiescent Current | 0.5 uA | — |
| Open-Loop Gain | 80 dB | — |
| ESD Protection | 2 kV improved ESD | — |
| Package | 14-SOIC, 0.209 inch, 5.30 mm width | 14-pin SOIC |
| Mounting Type | Surface mount | Surface mount |
| Operating Voltage, Positive | 3 V to 26 V | — |
| Operating Voltage, Negative | -26 V to -3 V | — |
| Output Voltage Range | Approximately -13 V to +13 V | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 600 µV typical |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Number of Amplifiers | — | 4 amplifiers |
| Number of Circuits | — | 4 circuits |
| Improved ESD Protection | — | 2 kV |
| Common-Mode Input Range | — | To ground |
| Differential Input Voltage Capability | — | High differential input voltage capability |
| Supply Configuration | — | Single supply or split supply |
| Compensation | — | Internally frequency compensated |
| Channel Independence | — | 4 independent amplifiers |