LM2903HYDT vs LM2903AVQDRQ1 Comparison
Detailed side-by-side comparison of LM2903HYDT by STMicroelectronics and LM2903AVQDRQ1 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
LM2903HYDT - Dual 36V Open-Collector Comparator | STMicroelectronics
LM2903HYDT ✓ ActiveTexas Instruments
LM2903AVQDRQ1 - 36V AEC-Q100 Dual Open-Collector Comparator | Texas Instruments
LM2903AVQDRQ1 ✓ ActiveSpecification Comparison
| Parameter | LM2903HYDT | LM2903AVQDRQ1 |
|---|---|---|
| Brand | STMicroelectronics | Texas Instruments |
| Category | Interface ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Low-power dual differential voltage comparator | Differential, general purpose |
| Number of Channels | 2 channels | 2 |
| Supply Voltage Range | 2 V to 36 V | — |
| Dual-Supply Operating Range | ±1 V to ±18 V | — |
| Typical Supply Current | 0.4 mA | — |
| Typical Power Consumption per Comparator | 1 mW at 5 V | — |
| Typical Input Bias Current | 25 nA | — |
| Typical Input Offset Current | ±5 nA | — |
| Input Common-Mode Voltage Range | Includes ground | — |
| Differential Input Voltage Range | Equal to maximum rated supply voltage | [DATA_NEEDED: maximum differential input voltage] |
| Output Type | Open-collector, rail-to-rail | Open-Collector / Open-Drain, Rail-to-Rail |
| Typical Low Saturation Voltage | 250 mV at 4 mA output current | — |
| Propagation Delay | 1.3 µs | 1.3 us |
| Package | 8-pin SOIC | 8-SOIC (D), 0.154 in (3.90 mm) body width |
| Mounting Type | Surface mount | Surface Mount |
| Packaging | Tape and reel | — |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 Grade 0 and Grade 1 |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance statement] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Supply Voltage Range, Single | — | 2 V to 36 V |
| Supply Voltage Range, Dual | — | +/-1 V to +/-18 V |
| Input Common-Mode Range | — | Rail-to-Rail |
| Supply Current | — | 0.4 mA per channel (distributor specification listing) |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Operating Temperature Range | — | -40 C to +125 C |
| ESD Qualification Test | — | MIL-STD-883, Method 3015 |
| Number of Pins | — | 8 |
| Supply Voltage Independent Supply Current | — | Yes, low supply-current drain independent of supply voltage |
| Lead Finish | — | [DATA_NEEDED: lead finish / lead-free status] |