LM2903MX-ON vs LM2903MX Comparison
Detailed side-by-side comparison of LM2903MX-ON by onsemi and LM2903MX by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM2903MX-ON | LM2903MX |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Dual differential voltage comparator | General Purpose |
| Number of Channels | 2 channels | — |
| Output Type | Open collector | Open-Collector |
| Supply Voltage Range | 2 V to 36 V | — |
| Input Offset Voltage | 2.0 mV maximum | — |
| Common-Mode Input Range | Extends to ground in single-supply operation | — |
| Operating Supply Mode | Single supply or split supply | — |
| Operating Temperature Range | -40°C to +85°C | -40 °C to +85 °C |
| Package | 8-pin SOIC | 8-SOIC, 0.154 in (3.90 mm) body width |
| Mounting Type | Surface mount | — |
| Channel Independence | 2 independent comparator channels | — |
| Output Pull-Up | External pull-up resistor required | — |
| Wired-AND Capability | Supported by open-collector outputs | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict-Minerals Status | [DATA_NEEDED: conflict-minerals status] | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range, Single Supply | — | 2 V to 36 V |
| Supply Voltage Range, Dual Supply | — | 1 V to 18 V |
| Response Time | — | 1.3 us |
| Input Common-Mode Capability | — | Rail-to-Rail |
| Logic Compatibility | — | CMOS, MOS, TTL |
| Differential Input Voltage Range | — | ±38 V |
| Number of Pins | — | 8 pins |
| Low Offset | — | 0.37 mV |
| Low Input Bias Current | — | 3.5 nA |
| Supply Current | — | 200 uA per comparator |
| ESD Rating | — | 2 kV HBM |