LM2903MX vs LM2903MX-ON Comparison
Detailed side-by-side comparison of LM2903MX by Texas Instruments and LM2903MX-ON by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM2903MX | LM2903MX-ON |
|---|---|---|
| Brand | Texas Instruments | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | General Purpose | Dual differential voltage comparator |
| Number of Comparators | 2 | — |
| Supply Voltage Range, Single Supply | 2 V to 36 V | — |
| Supply Voltage Range, Dual Supply | 1 V to 18 V | — |
| Response Time | 1.3 us | — |
| Output Type | Open-Collector | Open collector |
| Input Common-Mode Capability | Rail-to-Rail | — |
| Logic Compatibility | CMOS, MOS, TTL | — |
| Differential Input Voltage Range | ±38 V | — |
| Package | 8-SOIC, 0.154 in (3.90 mm) body width | 8-pin SOIC |
| Number of Pins | 8 pins | — |
| Operating Temperature Range | -40 °C to +85 °C | -40°C to +85°C |
| Low Offset | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | — |
| Supply Current | 200 uA per comparator | — |
| ESD Rating | 2 kV HBM | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | 2 V to 36 V |
| Input Offset Voltage | — | 2.0 mV maximum |
| Common-Mode Input Range | — | Extends to ground in single-supply operation |
| Operating Supply Mode | — | Single supply or split supply |
| Mounting Type | — | Surface mount |
| Channel Independence | — | 2 independent comparator channels |
| Output Pull-Up | — | External pull-up resistor required |
| Wired-AND Capability | — | Supported by open-collector outputs |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Conflict-Minerals Status | — | [DATA_NEEDED: conflict-minerals status] |