LM2903MX vs LM2903QDRG4 Comparison
Detailed side-by-side comparison of LM2903MX by Texas Instruments and LM2903QDRG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM2903MX | LM2903QDRG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | General Purpose | Dual differential comparator |
| Number of Comparators | 2 | — |
| Supply Voltage Range, Single Supply | 2 V to 36 V | — |
| Supply Voltage Range, Dual Supply | 1 V to 18 V | — |
| Response Time | 1.3 us | — |
| Output Type | Open-Collector | Open collector |
| Input Common-Mode Capability | Rail-to-Rail | — |
| Logic Compatibility | CMOS, MOS, TTL | — |
| Differential Input Voltage Range | ±38 V | — |
| Package | 8-SOIC, 0.154 in (3.90 mm) body width | 8-pin SOIC |
| Number of Pins | 8 pins | — |
| Operating Temperature Range | -40 °C to +85 °C | -40°C to +125°C |
| Low Offset | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | — |
| Supply Current | 200 uA per comparator | — |
| ESD Rating | 2 kV HBM | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Channels | — | 2 independent channels |
| Maximum Supply Voltage | — | 36 V |
| Single-Supply Operating Range | — | 2 V to 36 V |
| Dual-Supply Total Range | — | 2 V to 36 V |
| Minimum Positive Supply Offset | — | 1.5 V |
| Supply Current Per Comparator | — | 0.4 mA typical |
| Input Bias Current | — | 25 nA typical |
| Mounting Type | — | Surface mount |
| Automotive Qualification Coding | — | G4 ordering suffix |
| Output Pull-Up Requirement | — | [DATA_NEEDED: recommended pull-up resistance] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |