LM2903QDRG4 vs LM2903MX Comparison
Detailed side-by-side comparison of LM2903QDRG4 by Texas Instruments and LM2903MX by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM2903QDRG4 | LM2903MX |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Dual differential comparator | General Purpose |
| Number of Channels | 2 independent channels | — |
| Output Type | Open collector | Open-Collector |
| Maximum Supply Voltage | 36 V | — |
| Single-Supply Operating Range | 2 V to 36 V | — |
| Dual-Supply Total Range | 2 V to 36 V | — |
| Minimum Positive Supply Offset | 1.5 V | — |
| Supply Current Per Comparator | 0.4 mA typical | — |
| Input Bias Current | 25 nA typical | — |
| Operating Temperature Range | -40°C to +125°C | -40 °C to +85 °C |
| Package | 8-pin SOIC | 8-SOIC, 0.154 in (3.90 mm) body width |
| Mounting Type | Surface mount | — |
| Automotive Qualification Coding | G4 ordering suffix | — |
| Output Pull-Up Requirement | [DATA_NEEDED: recommended pull-up resistance] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Comparators | — | 2 |
| Supply Voltage Range, Single Supply | — | 2 V to 36 V |
| Supply Voltage Range, Dual Supply | — | 1 V to 18 V |
| Response Time | — | 1.3 us |
| Input Common-Mode Capability | — | Rail-to-Rail |
| Logic Compatibility | — | CMOS, MOS, TTL |
| Differential Input Voltage Range | — | ±38 V |
| Number of Pins | — | 8 pins |
| Low Offset | — | 0.37 mV |
| Low Input Bias Current | — | 3.5 nA |
| Supply Current | — | 200 uA per comparator |
| ESD Rating | — | 2 kV HBM |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |