LM2903QDRG4Q1 vs LM2903VQDRQ1 Comparison
Detailed side-by-side comparison of LM2903QDRG4Q1 by Texas Instruments and LM2903VQDRQ1 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ ActiveSpecification Comparison
| Parameter | LM2903QDRG4Q1 | LM2903VQDRQ1 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Supply Voltage Range | 2 V to 36 V | — |
| Dual Supply Range | ±1 V to ±18 V | — |
| Output Type | Open-collector | Open-collector |
| Maximum Input Offset Voltage | 7 mV at 5 V | — |
| Maximum Input Bias Current | 0.25 µA | — |
| Typical Output Current | 20 mA | — |
| Maximum Quiescent Current | 2.5 mA | — |
| Automotive Qualification | AEC-Q100 Grade 0 and 1 | AEC-Q100 Grade 0 and Grade 1 |
| Operating Temperature Range | -40°C to +125°C | -40 °C to +125 °C |
| Package | 8-SOIC (D), 8 pins | 8-pin SOIC (D) |
| Package Width | 3.90 mm | 3.90 mm |
| Package Length | 0.154 inch | 0.154 inch |
| Mounting Type | Surface mount | Surface mount |
| Single-Supply Operation | 2 V to 36 V | — |
| Minimum Supply Difference in Dual Operation | 2 V | — |
| Minimum VCC Margin for Dual-Supply Operation | 1.5 V | — |
| ESD Qualification | 2 kV ESD performance | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Supply Voltage Range, Single Supply | — | 2 V to 36 V |
| Supply Voltage Range, Dual Supply | — | ±1 V to ±18 V |
| Differential Input Voltage Range | — | Up to maximum-rated supply voltage |
| Common-Mode Input Voltage Range | — | Includes ground |
| Supply-Current Drain | — | 0.4 mA |
| Propagation Delay | — | Approximately 1.3 µs |
| Logic Compatibility | — | TTL, MOS, and CMOS compatible |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |