LM2903QDRQ1 vs LM2903QDRG4Q1 Comparison
Detailed side-by-side comparison of LM2903QDRQ1 by Texas Instruments and LM2903QDRG4Q1 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2903QDRQ1 - 36V Automotive Dual Comparator | Texas Instruments
LM2903QDRQ1 ✓ ActiveSpecification Comparison
| Parameter | LM2903QDRQ1 | LM2903QDRG4Q1 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 | 2 channels |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | AEC-Q100 Grade 0 and 1 |
| Single-Supply Operating Range | 2 V to 36 V | — |
| Dual-Supply Operating Range | Total supply difference of 2 V to 36 V | — |
| Supply Current | 0.4 mA per comparator | — |
| Input Offset Voltage | 2 mV typical | — |
| Input Bias Current | 25 nA typical | — |
| Output Type | Open collector | Open-collector |
| Logic Compatibility | Compatible with TTL, MOS, and CMOS | — |
| Package | 8-pin SOIC | 8-SOIC (D), 8 pins |
| Mounting Type | Surface mount | Surface mount |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS status] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Dual Supply Range | — | ±1 V to ±18 V |
| Maximum Input Offset Voltage | — | 7 mV at 5 V |
| Maximum Input Bias Current | — | 0.25 µA |
| Typical Output Current | — | 20 mA |
| Maximum Quiescent Current | — | 2.5 mA |
| Package Width | — | 3.90 mm |
| Package Length | — | 0.154 inch |
| Single-Supply Operation | — | 2 V to 36 V |
| Minimum Supply Difference in Dual Operation | — | 2 V |
| Minimum VCC Margin for Dual-Supply Operation | — | 1.5 V |
| ESD Qualification | — | 2 kV ESD performance |
| RoHS Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |