LM2903VQDRQ1 vs LM2903AVQDRQ1 Comparison
Detailed side-by-side comparison of LM2903VQDRQ1 by Texas Instruments and LM2903AVQDRQ1 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ ActiveTexas Instruments
LM2903AVQDRQ1 - 36V AEC-Q100 Dual Open-Collector Comparator | Texas Instruments
LM2903AVQDRQ1 ✓ ActiveSpecification Comparison
| Parameter | LM2903VQDRQ1 | LM2903AVQDRQ1 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Dual differential comparator | Differential, general purpose |
| Number of Channels | 2 channels | 2 |
| Output Type | Open-collector | Open-Collector / Open-Drain, Rail-to-Rail |
| Supply Voltage Range, Single Supply | 2 V to 36 V | — |
| Supply Voltage Range, Dual Supply | ±1 V to ±18 V | — |
| Differential Input Voltage Range | Up to maximum-rated supply voltage | [DATA_NEEDED: maximum differential input voltage] |
| Common-Mode Input Voltage Range | Includes ground | — |
| Supply-Current Drain | 0.4 mA | — |
| Propagation Delay | Approximately 1.3 µs | 1.3 us |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | AEC-Q100 Grade 0 and Grade 1 |
| Operating Temperature Range | -40 °C to +125 °C | -40 C to +125 C |
| Package | 8-pin SOIC (D) | 8-SOIC (D), 0.154 in (3.90 mm) body width |
| Package Width | 3.90 mm | — |
| Package Length | 0.154 inch | — |
| Mounting Type | Surface mount | Surface Mount |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance statement] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Supply Voltage Range, Single | — | 2 V to 36 V |
| Supply Voltage Range, Dual | — | +/-1 V to +/-18 V |
| Input Common-Mode Range | — | Rail-to-Rail |
| Supply Current | — | 0.4 mA per channel (distributor specification listing) |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| ESD Qualification Test | — | MIL-STD-883, Method 3015 |
| Number of Pins | — | 8 |
| Supply Voltage Independent Supply Current | — | Yes, low supply-current drain independent of supply voltage |
| Lead Finish | — | [DATA_NEEDED: lead finish / lead-free status] |