LM339ANG4 vs LM2901N Comparison
Detailed side-by-side comparison of LM339ANG4 by Texas Instruments and LM2901N by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM339ANG4 - 4-Channel 30V Differential Comparator | Texas Instruments
LM339ANG4 ✓ ActiveSpecification Comparison
| Parameter | LM339ANG4 | LM2901N |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Logic ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | General-purpose differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Output Type | Open-collector | Open collector |
| Single-Supply Voltage Range | 2 V to 30 V | — |
| Dual-Supply Voltage Range | -15 V to +15 V | — |
| Maximum Input Offset Voltage | 3 mV at 30 V | — |
| Maximum Input Bias Current | 0.25 µA at 5 V | — |
| Typical Output Current | 20 mA | — |
| Maximum Common-Mode Input Voltage | 38 V | — |
| Maximum Differential Input Voltage | 38 V | — |
| Package | 14-DIP, 0.300 inch (7.62 mm) lead spacing | 14-pin DIP |
| Mounting Type | Through-hole | Through hole |
| Logic Compatibility | TTL, MOS, and CMOS compatible | TTL, DTL, MOS, ECL, and CMOS output compatibility |
| Human Body Model ESD Rating | 2 kV | — |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Supply Configuration | — | Single or split supply |
| Maximum Supply Voltage | — | 36 V |
| Input Bias Current | — | 25 nA typical |
| Input Offset Current | — | ±5.0 nA typical |
| Supply Current Drain | — | 800 µA typical |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Response Time | — | [DATA_NEEDED: comparator response time] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| RoHS Status | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |