LM339ANG4 vs LM339N Comparison
Detailed side-by-side comparison of LM339ANG4 by Texas Instruments and LM339N by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM339ANG4 - 4-Channel 30V Differential Comparator | Texas Instruments
LM339ANG4 ✓ ActiveSpecification Comparison
| Parameter | LM339ANG4 | LM339N |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Logic ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | General-purpose differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 |
| Output Type | Open-collector | Open-collector |
| Single-Supply Voltage Range | 2 V to 30 V | — |
| Dual-Supply Voltage Range | -15 V to +15 V | — |
| Maximum Input Offset Voltage | 3 mV at 30 V | — |
| Maximum Input Bias Current | 0.25 µA at 5 V | — |
| Typical Output Current | 20 mA | — |
| Maximum Common-Mode Input Voltage | 38 V | — |
| Maximum Differential Input Voltage | 38 V | — |
| Package | 14-DIP, 0.300 inch (7.62 mm) lead spacing | 14-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Human Body Model ESD Rating | 2 kV | — |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Differential Input Voltage Range | — | +/- 1 V to +/- 18 V |
| Response Time | — | 1.3 microseconds |
| Comparator Configuration | — | Four independent comparators |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| External Pull-Up Resistor | — | Required for open-collector output |
| Manufacturer Classification | — | Low Power Low Offset Voltage Quad Comparator |
| Datasheet Availability | — | Manufacturer product page and datasheet referenced |