LM339PW vs LM339DTBR2G Comparison
Detailed side-by-side comparison of LM339PW by Texas Instruments and LM339DTBR2G by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM339PW - 4-Channel 36V Open-Collector Comparator | Texas Instruments
LM339PW ✓ ActiveSpecification Comparison
| Parameter | LM339PW | LM339DTBR2G |
|---|---|---|
| Brand | Texas Instruments | onsemi |
| Category | Interface ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Quad differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Output Type | Open-collector | Open collector |
| Supply Voltage Range | 2 V to 36 V | 3 V to 36 V |
| Maximum Family Rating | Up to 38 V | — |
| Propagation Delay | 300 ns | — |
| Family Response Time | 1 µs | — |
| Low Input Offset | 0.37 mV | — |
| Low Input Bias Current | 3.5 nA | — |
| Supply Current per Comparator | 200 µA typical | — |
| Common-Mode Input Range | Includes ground | — |
| Differential Input Voltage | Equal to maximum-rated supply voltage, up to ±38 V | — |
| ESD Rating HBM | 2 kV | — |
| Output Compatibility | Compatible with TTL, MOS, and CMOS | — |
| Package | 14-pin TSSOP | 14-pin TSSOP |
| Mounting Type | Surface mount | Surface mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Supply Configuration | — | Single supply |
| Logic Compatibility | — | CMOS and TTL compatible |
| Operating Temperature Grade | — | Commercial temperature grade |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Pull-Up Requirement | — | [DATA_NEEDED: external pull-up resistor requirements] |
| Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Response Time | — | [DATA_NEEDED: comparator response time] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |