LM358D vs OPA651U Comparison
Detailed side-by-side comparison of LM358D by Texas Instruments and OPA651U by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM358D - Dual 700kHz General Purpose Op Amp | Texas Instruments (Tape & Reel)
LM358D ✓ Active
Specification Comparison
| Parameter | LM358D | OPA651U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Obsolete |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.05 | $0.92 |
| Amplifier Type | General Purpose Operational Amplifier | Voltage Feedback Operational Amplifier |
| Number of Circuits | 2 | — |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/µs | 340 V/µs |
| Supply Voltage (Single) | 3 V to 32 V | — |
| Supply Voltage (Dual) | ±1.5 V to ±16 V | — |
| Supply Current (per channel) | 0.7 mA (typ) | — |
| Input Offset Voltage | 2 mV (typ), 7 mV (max) | — |
| Common-Mode Input Range | Extends to ground (V-) | — |
| Output Current | 20 mA (typ, short-circuit protected) | — |
| Minimum Load Resistance | 2 kΩ | — |
| Operating Temperature | 0°C to +70°C | — |
| Package | SOIC-8 (D) | 8-SOIC (D, 0.154" / 3.90 mm width) |
| Mounting Type | Surface Mount | Surface Mount |
| Internal Compensation | Yes (unity-gain stable) | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS compliance] |
| Number of Channels | — | 1 |
| Small-Signal Bandwidth (G = +2) | — | 470 MHz |
| Settling Time to 0.01% | — | 16 ns |
| Quiescent Power | — | 50 mW (typ) |
| Supply Voltage Range | — | ±4.5 V to ±5.5 V (single 9 V to 11 V) |
| Input Bias Current | — | 4 µA |
| Stable Gain | — | ≥ 2 V/V |
| Differential Gain / Phase | — | 0.05% / 0.1° |
| Low-Distortion Bandwidth | — | 5 MHz |
| Operating Temperature Range | — | -40 °C to +85 °C |
| MSL Level | — | [DATA_NEEDED: MSL rating] |
| Pinout | — | Standard SOIC-8 single op-amp (OUT, IN-, IN+, V-, DIS*, V+, NC, V+) |