LM393BIDR vs LM2903DR Comparison
Detailed side-by-side comparison of LM393BIDR by Texas Instruments and LM2903DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
LM2903DR - Dual Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM2903DR ✓ ActiveSpecification Comparison
| Parameter | LM393BIDR | LM2903DR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Dual differential general-purpose comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Output Type | Open-collector | Open-collector |
| Supply Voltage Range | [DATA_NEEDED: operating supply voltage range] | 2 V to 36 V |
| Maximum Rated Supply Voltage | 38 V | — |
| Differential Input Voltage Range | -38 V to +38 V | — |
| Common-Mode Input Range | Includes ground | — |
| Maximum Input Offset Voltage | 2.5 mV | — |
| Typical Low Input Offset Voltage | 0.37 mV | — |
| Input Bias Current | 3.5 nA | [DATA_NEEDED: input bias current] |
| Supply Current | 200 µA per comparator | — |
| Response Time | 1 µs | 300 ns |
| ESD Rating (HBM) | 2 kV | — |
| Operating Temperature Range | -40°C to +85°C | -40 °C to +125 °C |
| Output Compatibility | TTL, MOS, and CMOS | — |
| Package | 8-pin SOIC (D) | 8-pin SOIC |
| Mounting Type | Surface mount | Surface mount |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Supply Configuration | — | Single supply or split supply |
| Channel Independence | — | Two independent comparator channels |
| Output Logic Style | — | Open-collector, pull-up resistor required |
| Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Quiescent Current | — | [DATA_NEEDED: supply current per channel] |
| Propagation Delay | — | 300 ns response time |
| Output High Voltage | — | [DATA_NEEDED: output high-level voltage with pull-up] |