LM393DRG3 vs LM393DRE4 Comparison
Detailed side-by-side comparison of LM393DRG3 by Texas Instruments and LM393DRE4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM393DRG3 | LM393DRE4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | Differential | Differential, dual channel |
| Number of Channels | 2 channels | — |
| Output Type | Open-collector | Open-collector |
| Single-Supply Voltage Range | 2 V to 36 V | — |
| Dual-Supply Voltage Range | ±1 V to ±18 V | — |
| Common-Mode Input Range | Includes ground | — |
| Differential Input Voltage Range | Equal to the maximum-rated supply voltage | — |
| Tested Supply Voltage | 30 V for V-device and 32 V for non-V device | — |
| Logic Compatibility | CMOS, MOS, and TTL | TTL |
| Package | 8-pin SOIC | — |
| Package Width | 3.90 mm | — |
| Package Body Length | 0.154 inch | — |
| Commercial Grade | Commercial-grade application | — |
| Output Configuration | Open-collector output with external pull-up required | — |
| Input Offset Voltage at 25°C | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | 300 ns |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance] | — |
| Comparator Count | — | 2 |
| Supply Voltage Range | — | 2 V to 36 V |
| Maximum Rated Supply Voltage | — | 18 V |
| Supply Current per Comparator | — | 0.4 mA typical |
| Input Common-Mode Range | — | Rail-to-rail |
| Maximum Operating Temperature | — | 70°C |
| Pin Count | — | 8 pins |
| Package Type | — | SOIC-8 |
| Mounting Type | — | Surface mount |
| Tolerance | — | [DATA_NEEDED: tolerance] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| RoHS Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |