LP5900TLX-1.8 vs LTC3410ESC6-1.875#TRPBF Comparison

Detailed side-by-side comparison of LP5900TLX-1.8 by Texas Instruments and LTC3410ESC6-1.875#TRPBF by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Analog Devices
LTC3410ESC6-1.875#TRPBF LTC3410ESC6-1.875#TRPBF - 1.875V 300mA Buck Regulator

LTC3410ESC6-1.875#TRPBF - 1.875V 300mA Buck Regulator

LTC3410ESC6-1.875#TRPBF ✓ Active

Specification Comparison

Parameter LP5900TLX-1.8 LTC3410ESC6-1.875#TRPBF
Brand Texas Instruments Analog Devices
Category Voltage Regulators DC-DC Converters
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $0.23 $1.05
Output Type Fixed —
Fixed Output Voltage 1.8 V —
Maximum Output Current 150 mA 300 mA
Input Voltage Range 2.5 V to 5.5 V 2.5 V to 5.5 V
Dropout Voltage 90 mV typical at 150 mA —
Output Noise 6.5 uVrms (10 Hz to 100 kHz) —
PSRR 85 dB at 1 kHz —
Quiescent Current (enabled) 25 uA typical —
Quiescent Current (shutdown) 1.1 uA typical —
Output Voltage Tolerance ±2 % —
Enable Pin Yes (active-high) —
Operating Temperature -40 C to +125 C [DATA_NEEDED: operating temperature range]
Package 4-DSBGA (YZR) 1 mm x 1 mm 6-pin SC-70, MO-203AB
Mounting Type Surface Mount Surface Mount
Bypass Capacitor Required No —
RoHS Status Compliant [DATA_NEEDED: RoHS compliance status]
Input Capacitor 0.1 uF ceramic minimum —
Output Capacitor 1 uF ceramic low-ESR —
Product Type — Synchronous step-down DC-DC converter
Output Voltage — 1.875 V fixed
Switching Frequency — 2.25 MHz nominal
Efficiency — Up to 96%
Quiescent Current — 26 µA in Burst Mode
Output Ripple — Approximately 20 mVp-p
Feedback Reference Voltage — 0.8 V
Control Topology — Synchronous buck regulation
Rectifier — Internal synchronous switch; no external Schottky diode required
Package Type — SC-70 / 6-TSSOP / SOT-363
Lead-Free Marking — TRPBF
Lifecycle Status — Active
Typical VIN Used in Verified Specification — 3.6 V
Typical Output Current at VIN 3 V — 380 mA minimum listed in source snippet

Datasheets & Resources

Browse All Products Create BOM Request Quote