LT1014ISW vs LT1014DSW Comparison
Detailed side-by-side comparison of LT1014ISW by Analog Devices and LT1014DSW by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LT1014ISW | LT1014DSW |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Number of Amplifiers | 4 amplifiers | 4 circuits |
| Precision | 50 µV offset voltage | — |
| Input Offset Voltage | 50 µV maximum | [DATA_NEEDED: input offset voltage] |
| Input Offset Drift | 0.3 µV/°C | — |
| Input Offset Current | 0.15 nA | — |
| Open-Loop Gain | 8 million V/V | [DATA_NEEDED: open-loop gain] |
| Common-Mode Rejection Ratio | 117 dB | — |
| Power-Supply Rejection Ratio | 120 dB | — |
| Low-Voltage Noise | 0.55 µV peak-to-peak from 0.1 Hz to 10 Hz | 0.55 uV peak-to-peak at 0.1 Hz to 10 Hz |
| Input Current Noise | 0.07 pA/√Hz | — |
| Supply Current | 500 µA maximum | — |
| Typical Supply Current | 350 µA | — |
| Supported Supply Configuration | ±15 V or single 5 V | — |
| Single-Supply Input Range | Input range extends to ground | — |
| Operating Temperature | -40 °C to +85 °C | — |
| Package | 16-lead SOIC, 2.64 mm height | 16-lead SO surface-mount package |
| RoHS Compliance | [DATA_NEEDED: RoHS status] | — |
| REACH Compliance | [DATA_NEEDED: REACH status] | — |
| Amplifier Type | — | Quad precision operational amplifier |
| Supply Voltage Range | — | 5 V to 44 V |
| Single-Supply Operation | — | 5 V |
| Dual-Supply Operation | — | ±15 V |
| Guaranteed Maximum Supply Current | — | 500 uA |
| Current Noise Density | — | 0.07 pA/sqrt(Hz) |
| Mounting Type | — | Surface Mount |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage Drift | — | [DATA_NEEDED: input offset voltage temperature coefficient] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| RoHS Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |