MAX232IDG4 vs MAX232CSE+T Comparison
Detailed side-by-side comparison of MAX232IDG4 by Texas Instruments and MAX232CSE+T by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
MAX232IDG4 - Dual 120kbps RS-232 Transceiver | Texas Instruments
MAX232IDG4 ✓ ActiveSpecification Comparison
| Parameter | MAX232IDG4 | MAX232CSE+T |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual RS-232 line-driver and receiver transceiver | — |
| Number of Driver Channels | 2 channels | — |
| Number of Receiver Channels | 2 channels | — |
| Maximum Data Rate | 120 kbit/s | — |
| Single-Supply Operation | 5 V | — |
| RS-232 Driver Output Level | Approximately +9 V to -9 V | — |
| Receiver Input Voltage Range | ±30 V | ±30 V |
| ESD Protection | ±2 kV | — |
| Charge-Pump Capacitance | 1.0 µF per charge-pump capacitor | — |
| Supply Current | 8 mA typical | — |
| Operating Temperature Range | -40 °C to 85 °C | 0 °C to +70 °C (commercial C-grade) |
| Package | 16-pin SOIC | 16-pin Narrow SOIC (SOIC-N-16) |
| Mounting Type | Surface mount | Surface Mount |
| Interface Standard | EIA-232 / V.28 | — |
| Logic Compatibility | [DATA_NEEDED: CMOS logic voltage levels] | — |
| Package Dimensions | [DATA_NEEDED: SOIC body size and lead dimensions in mm] | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | Not applicable | — |
| Function | — | RS-232 Line Driver/Receiver (Transceiver) |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Protocol | — | RS-232 (EIA/TIA-232E, V.28/V.24) |
| Supply Voltage (Vcc) | — | 4.5 V to 5.5 V (single +5V supply) |
| Data Rate | — | 120 kb/s |
| RS-232 Driver Output Voltage | — | ±7.5 V minimum (typical ±9 V) into 3 kΩ load |
| Charge Pump | — | Internal; requires 4 × 1 µF external capacitors |
| MSL Level | — | 1 (unlimited floor life at <30 °C / 85 % RH) |
| Lead-Free / RoHS | — | Yes (compliant per +T suffix) |
| Receiver Input Hysteresis | — | [DATA_NEEDED: receiver hysteresis voltage] |
| Supply Current (No Load) | — | [DATA_NEEDED: typical Icc] |
| Packaging | — | Tape & Reel (T+R) |